Course
NSW Light Rigid (LR)
As a Registered Training Organisation (RTO), Transport Industries Skills Centre Inc. (TISC) is qualified to conduct heavy vehicle truck licence training and assessment on behalf of both the ACT and NSW Governments. Our facilities and fleet are located at the Sutton Road Training Centre with everything in one place to help you get your truck licence. Training and Assessments are delivered one-on-one with the trainer so students receive high quality training that can be customised to meet the students’ various needs.
The following course information is specifically for the Light Rigid (LR) Synchromesh licence class issued in NSW.
There are different course information pages for larger vehicle classes and ACT licences.
What do I need to apply for an LR licence?
You must –
- Have held a current C class driver licence (except a learner licence) for 1 year or more
- Be a minimum of 18 years old
- Completed TISC Enrolment Form
- Pass the Heavy Vehicle Knowledge Test from a Transport for NSW Centre prior to enrolling in any heavy vehicle training or assessments. Students can complete this at the Queanbeyan Service Centre (13 77 88).
- Pass an Eyesight Test
- Successfully complete the Heavy Vehicle Competency Based Assessment (HVCBA)
The HVCBA has a training element and an assessment element called the Final Competency Assessment
The Final Competency Assessment is the final practical test you must complete at the end of your HVCBA training. Your trainer and assessor will be different people.
In order to pass the assessment, you must demonstrate the skills you have learned in your HVCBA training and show that you can operate a heavy vehicle safely.
Once you pass this assessment, the assessor will submit your results to Transport for NSW and keep your log book.
You can then attend a service centre in person to upgrade or obtain your new heavy vehicle licence.
LR Course Content
-
-
- Criteria 1 – Pre-operational check
- Criteria 2 – Cabin drills
- Criteria 3 – Start, move off, shut down and secure
- Criteria 4 – Manage steering
- Criteria 5 – Manages gears
- Criteria 6 – Manages brakes
- Criteria 7 – Manages accelerator
- Criteria 8 – Create and maintain crash avoidance space
- Criteria 9 – Protect crash avoidance space
- Criteria 10 – Road rules and directions
- Criteria 11 – Reversing
- Criteria 12 – Hill stop/start
- Criteria 13 – Load securing
- Criteria 14 – Bus stop procedure (if course is conducted in a bus only)
-
What is a Light Rigid vehicle?
- A motor vehicle with a gross vehicle mass (GVM) over 4.5 tonne, but not over 8 tonne.
- A motor vehicle with a GVM not over 8 tonne that is constructed or equipped to seat more than 12 adults (including the driver).
- A motor vehicle that is towing a single trailer with a GVM not over 9 tonne.
However, this class does not cover a motor vehicle that is towing:
- 2 or more trailers; or
- a single trailer with a GVM over 9 tonne.
What is an Light Rigid Licence?
This licence class is applied to vehicles such as trucks and buses.
If you’ve held a “C” class driving licence for at least 1 year, you could upgrade your driver licence to a light rigid licence and further your career in the transport industry.
Completing the course will give you an LR licence which will allow you to drive automatic and synchromesh manual vehicles. You will be able to safely drive a vehicle with 2 axles with a GVM over 4.5 tonne, but not over 8 tonne, including buses that seat more than 12 adults, including the driver, and a GVM up to 8 tonnes.
Meeting the necessary LR licence requirements means you will be able to legally drive and operate a variety of vehicles used in the transport industry – increasing your skills and employability.
If you complete the course in a vehicle with a synchromesh gearbox, “Condition B” will appear on your licence, enabling you to drive trucks with and automatic and synchromesh gearbox.
Synchromesh gearbox
A synchromesh gearbox is a manually operated transmission in which a change of gears takes place between gears that are already revolving at the same speed. It is often claimed that a synchromesh gearbox requires less effort to change gears. These gear boxes have 5 to 6 forward gears.
Resources for this licence class –
Practice Knowledge test
https://practicetest.rms.nsw.gov.au/pages/practice-tests?init=true
Knowledge Test Question bank
https://www.nsw.gov.au/sites/default/files/2021-09/driver-knowledge-test-questions-heavy-rigid.pdf
Guide to Heavy Vehicle Competency Based Assessment
Heavy Vehicle Driver Handbook
Heavy Vehicle Drivers Handbook (nsw.gov.au)
Road User handbook
https://www.nsw.gov.au/sites/default/files/2021-05/road_users_handbook-english.pdf
Load Restraint Guide
https://www.ntc.gov.au/sites/default/files/assets/files/Load-Restraint-Guide-2018.pdf
- All pricing includes GST
- Full payment must be made at time of booking
- Students are required to complete a minimum of 5 hours training before an assessment
- The cost for the Light and the Medium rigid is offered at the same price as we do not have a light rigid vehicle.
| Licence Class | 2 hour Training Own Vehicle / TISC |
Assessment Own Vehicle / TISC |
One Day Course* Own Vehicle / TISC |
| Light Rigid | $395 / $425 | $425 / $460 | $1515 / $1635 |
It is recommended that students enrol in a one day course consisting of 6 hours of training followed by a 2 hour assessment session.
The one day course runs from 8:00am until 5:00pm, alternatively, individual training and assessment sessions can be booked in the following time blocks:
- 8:00am – 10:00am
- 10:00am – 12:00pm
- 1:00pm – 3:00pm
In the first training session, students must complete a pre-departure check, a load restraint demonstration and cabin controls check before they can commence the practical driving component. Please arrive 15 minutes prior to the course commencing to complete the relevant paperwork.
All students must –
- Have a moderate level of English language. A language, Literacy and Numeracy assessment might require completion prior to enrolment.
- Be confident in driving a manual vehicle.
- Have held a current drivers licence for a minimum of one year (provisional licences are accepted).
- Be a minimum of 18 years old.
- Have completed a Driver Knowledge Test from a Transport for NSW Centre prior to enrolling in any heavy vehicle training or assessments. Students can complete this at the Queanbeyan Service Centre (13 77 88).
- Obtain the Competency Based Assessment logbook from a Transport for NSW Centre.
- Have a completed TISC Enrolment Form e-mailed to office@suttonroad.com.au together with your driver licence and knowledge test to finalise the full enrolment process or complete the enrolment at the bottom of this page. During the online enrolment process, you will be asked to upload your driver licence and knowledge test so please have this ready.
- Current driver licence.
- Competency Based Assessment logbook provided by a Transport for NSW Centre
- Students are required to bring their own lunch; however fast food outlets are located in Queanbeyan if you prefer to purchase it. A fridge, microwave, tea, coffee and biscuits are provided.
- Enclosed shoes and comfortable clothing suitable for the expected weather.
- High visibility vest. (We can provide you with one on the day)
- Additional items depending on the weather such as a hat, sunscreen or rain jacket where required.
You will need to use your own vehicle – please note the following:
- Someone who is licenced to drive this class will need to accompany you or bring and collect the vehicle.
- Your vehicle must be ACT or NSW registered. (It cannot be federally registered)
- Must be 75% loaded – this load cannot be dangerous goods, livestock, or fluid (excludes busses) – we will require a weighbridge ticket.
- Must have two or more seats, all fitted with full seatbelts.
- We will require a copy of your vehicle registration papers with your enrolment forms.
The course is assessed with a practical demonstration that meets the heavy vehicle licensing assessment requirements set by Road User Services. If a student is ‘Not Yet Competent’, they need to enrol in another individual assessment at a later date and pay the associated fee.
Students who are found competent will not be licenced to drive a Light Rigid vehicle yet. You first need to present the appropriate documentation provided by the TISC Assessor to a Transport for NSW Centre. The course price does not include the cost for issuing a new driver licence.
As the assessment for this course is regulated, we are unable to offer RPL or credit transfers for students. Students with existing experience driving a heavy vehicle can complete a reduced amount of training but will still have to complete the practical assessment.
Students have a right to appeal any assessment decision. A student wanting to make a complaint or appeal will need to complete the Assessment Complaints and Appeals Recording Form. Students can obtain a hard copy of the Assessment Complaints and Appeals Recording Form from reception or request it via email.
In the event that TISC is unable to complete the delivery of any of the course, a full refund will be issued.
As part of TISC’s obligation to the learner, we will ensure that all training is compliant with the Standards for Registered Training Organisations (RTO’s) 2015.
A student’s driver licence, HVCBA logbook and course enrolment forms are required within 48-hours of making a booking. TISC does not accept any tentative bookings and will only confirm a student’s enrolment upon receipt of the driver licence, HVCBA logbook for LR, course enrolment forms and course payment.
COVID 19 Policy
Your co-operation in helping to keep the Sutton Road Training Centre free of COVID-19 is appreciated. If you are unwell and have any common COVID-19 symptoms you should not attend the Centre.
Cancellations made up to one week (7 days) prior to this course commencing will receive a full refund. Any cancellations made after this time will not be eligible for any refund.
Failure to attend training on the day will not result in a refund. TISC at their sole discretion may offer to rebook the student on a later course upon the presentation of a medical certificate for the course days that were missed.
We at located at 441 Sutton Road, Majura, ACT. Our training facilities are located on the left side of the road, approximately 900m from the Sutton Rd/Pialligo Avenue intersection. There is ample free onsite parking for students.
Before you can make a booking, we ask you to answer a few questions first so we can determine if you meet the course prerequisites. If you are eligible to enrol for this course, you will be directed to the booking page and you will require to upload the printed page with your details from your Heavy Vehicle Competency Based Assessment Logbook (Knowledge Test) and Driver Licence. Please ensure you have this ready to complete the booking.